eduGAIN (Education Global Authentication Infrastructure) enables researchers, educators and students in one country to collaborate with their colleagues and access applications, tools and datasets in other countries.
eduGAIN is a global initiative to connect federations around the world. For more information, go to https://edugain.org/
Tuakiri is now connected to eduGAIN. Subscribers can access international services or open their services to international researchers if desired. This information pack outlines the steps your organisation must take to connect to eduGAIN.
By connecting to eduGAIN, your organisation will benefit from:
Research & Scholarship Entity Category
Security Incident Response Trust Framework for Federated Identity
|IdP||Run the latest version of software||Consume Metadata|
|SP||Run the latest version of software|
|Recommende for qualifying services||Recommended|
Tuakiri recommends reviewing relevant legislation before connecting to eduGAIN.
The New Zealand Privacy Act (1993) consists of 12 Principles (see a quick tour of the privacy principles).
These principles set the rules for collecting, storing, correcting, and disclosing personal information.
New Zealand Identity Providers may disclose personal information to overseas Service Providers, but must satisfy themselves that international Service Providers have taken steps to protect personal information to a similar standard.
Key privacy principles subscribers should consider:
|For Identity Providers||For Service Providers|
|Principle 2 - Collection / Consent||Principle 1 - Purpose of Collection|
|Principle 2 - Collection|
|Principle 9 - Retention Period|
|Principle 10 - Limits on use / Original Purpose|
|Principle 11 - Disclosure|
Tuakiri Subscribers should review their obligations as they prepare to connect to eduGAIN. Tuakiri Subscribers should also consider other regulation that may apply to them.
All Tuakiri Subscribers are required to observe good practice in relation to the configuration, operation and security of their connections to the federation. In order to achieve this you will need to make sure that the Service Provider software connecting to eduGAIN is running the latest version.
There are a number of technical requirements your organisation’s IdP and SPs must follow to connect to eduGAIN. Requirements cover metadata consumption, attribute release for IdPs, attribute consumption and discovery for SPs. Specific information about the technical requirements to connect to eduGAIN is available in the Tuakiri Documentation or by contacting email@example.com.
Tuakiri supplies a new metadata source for eduGAIN that provides the technical trust for the international connection. Whether you run an IdP or an SP, you must consume this new metadata to connect to eduGAIN. This will require some minor configuration changes to your IdP or SP.
Your IdP will already release the Tuakiri Core Attributes to services in Tuakiri. Attributes required by services in eduGAIN will generally be a subset of these Core Attributes. For eduGAIN services qualifying for inclusion in the Research & Scholarship Entity Category, Tuakiri provides attribute release configuration for your IdP. For all other services, you will need to determine the attribute requirements either directly from the SP or from the eduGAIN metadata. We recommend installing attribute release configuration to automatically release attributes that are requested in the metadata received from eduGAIN.
Service Providers must ensure their attribute requirements are recorded in the Tuakiri Federation Registry. These requirements will be made available to IdPs in eduGAIN via metadata.
Tuakiri and international federations rely on the Discovery Service (also referred to as the ‘Where Are You From’ service) to help end-users identify which IdP to login to. The Tuakiri Discovery Service has been extended to include all eduGAIN IdPs. A simple change to the discovery URL in your Shibboleth SP configuration will enable the eduGAIN IdPs.
Your service can provide its own discovery mechanism rather than using the Tuakiri Discovery Service. The eduGAIN metadata that your service consumes will include all of the Metadata Extensions for Login and Discovery User Interface (MDUI) information that your service’s discovery mechanism will require.
The Research and Scholarship (R&S) Entity Category establishes a baseline attribute set that all research-related IdPs and SPs agree to exchange. The R&S Entity Category is an initiative of the international Research and Education Federations (REFEDS) community.
To connect an IdP to eduGAIN, it is mandatory for Tuakiri Subscribers to assert R&S. R&S establishes a set of attributes that services can expect to receive from IdPs. This simplifies integration, improves interoperability, and creates a smoother experience for researchers. Service Providers can also trust they will receive the attributes they need to authorise access. R&S reduces the likelihood of technical connection issues between federations.
|For Identity Providers||For Service Providers|
|Asserting R&S means|
“I support R&S and release the attributes defined in the R&S specification to Service Providers
“I meet the requirements of the R&S category.
|To connect to eduGAIN all IdPs need to assert the R&S Attribute Bundle.||If an SP meets the R&S Registration Criteria (refeds.org/category/research-and-scholarship)|
then you can expect to receive these attributes from an IdP asserting R&S.
The R&S attribute bundle consists of the following required data elements:
and one optional data element:
The shared user identifier is a persistent, non-reassigned, non-targeted identifier defined to be either of the following:
Person name is defined as either (or both) of the following:
Email address is defined as the mail attribute. Affiliation is defined as the eduPersonScopedAffiliation attribute.
SPs asserting R&S will also have to provide an InformationURL - a URL to a page providing further information about the service (the page should provide more complete information than the Description of the SP in the Federation Registry provides).
For more information about the R&S Entity Category, go to refeds.org/category/research-and-scholarship
Security Incident Response Trust Framework for Federated Identity (SIRTIFI).
SIRTFI (Security Incident Response Trust Framework for Federated Identity) provides a lightweight framework to request and provide security incident response assistance, publish security incident contact information and review your service’s security incident capability.
SIRTFI is an important global framework covering good practice for communicating about security incidents in an effective and timely manner. SIRTFI helps security contacts know who to contact in other organisations and the best channels to use. The SIRTFI framework is an initiative of REFEDS.
Step 1: Read and understand the SIRTFI framework requirements.
Step 2: Self-assess your organisational capability against the SIRTFI requirements.
Step 3: Provide your security contact information to Tuakiri to share with security contacts in other federations.
security) or contact Tuakiri Support at firstname.lastname@example.org
Step 4: Notify Tuakiri Support when contact details change.
The SIRTFI framework (refeds.org/wp-content/uploads/2016/01/Sirtfi-1.0.pdf) requires organisations to self-assess against the following areas:
|Security patches||IR assistance||Retaining records||Acceptable Use Policy (AUP)|
|Vulnerability management||SIRTFI IR assistance||Audit trails||User acknowledgement of AUP|
|User access rights||IR procedures|
|Contact information||User privacy|
|Security incident response||Traffic Light Protocol|
Organisations within the SIRTFI community agree to provide a coordinated response to security incidents, including assisting other organisations as required. SIRTFI requires organisations to understand and use the Traffic Light Protocol (TLP) for security incident communications. For more information about TLP, go to www.us-cert.gov/tlp
Both IdPs and SPs can provide logos that get embedded in their metadata - and can be used to provide users a visual clue in various parts of the user experience - an IdP logo can help identifying the right IdP at the Discovery Service, an SP logo displayed on the IdP login page can confirm to the user which service the user is logging into. And eduGAIN strongly encourages both IdPs and SPs to provide logos.
To provide a logo, please include an HTTPS link to your logo together in your request to join eduGAIN (below). The Tuakiri team will take care of including the logo in the metadata sent to eduGAIN.
The registration data for an IdP or SP in the Federation Registry include a (human readable) name and a description - which get included in the generate metadata.
For a Service Provider, it is highly recommended to provide a URL to page with further information about the service, which will be published into the eduGAIN metadata as
When your IdP is ready to be connected to eduGAIN, email email@example.com using the following template.
Dear Tuakiri Support, We request that the Identity Provider for “____SUBSCRIBER/ORGANISATION NAME____” be added to eduGAIN. We have completed and tested the following technical requirements: * Running the latest version of SAML software * Consuming the Tuakiri eduGAIN metadata * Verified the IdP can resolve R&S attributes * Configure attribute release for R&S attributes. Our IdP is R&S compliant. Our organisation is self-asserting SIRTFI. A logo representing our organisation is available at __URL__. Additional Security Contacts for your Identity Provider: “___NAME___” “___EMAIL___” “___PHONE___”
When your SP is ready to be connected to eduGAIN, email firstname.lastname@example.org using the following template.
Dear Tuakiri Support, We request that the service “____SERVICE NAME____” operated by “___ORGANISATION NAME___ “ be added to eduGAIN. We have completed and tested the following technical configuration changes: * Loading the Tuakiri eduGAIN metadata * An eduGAIN enabled Discovery Service We (do / do not) require this service to assert compliance with SIRTFI. We (do / do not) require this service to assert Research and Scholarly to enable access to R&S attributes. A logo representing this service is available at __URL__. A page with further information about the service is available at __URL__. Additional Security Contacts for your service: “___NAME___” “___EMAIL___” “___PHONE___”
With document has been adopted from original AAF documentation at https://aaf.edu.au/edugain/resources.html - with thanks to AAF for granting the permission for this reuse.